Grant 414 Challenger Steering Wheel - High-Performance Replacement for Dodge Challenger - Perfect for Racing, Drifting & Car Restoration Projects

First removed my horn fuse.Installation was straight forward- didn’t really read the instructions (skimmed over)—- followed the diagram step by step .* Pro tip: test fit the round horn fiber board (brown circular) - inside the actual horn button before placing it into the steering wheel. In my case it would have been a tight fit for the brown fiber board to push and lock inside the horn button- it was actually the same size was the horn button so it didn’t really fit . (Slightly oversized)** Pro tip : had to sand down 1/16” off the outer circumference of the fiberboard until it fit SNUG into the horn button (push in, turn and lock)- after mounting the wheel assembly - the last steps are fitting the (slightly sanded ) fiberboard into the 3 shoulder bolts and connecting the horn wire.- used a small piece of tape to hold the spring onto the inside (underneath) of the horn button, then push in (spring onto the center locking nut) and slight turn to lock the horn button in place.- re installed the horn fuse … done - steering wheel works,looks great and horn works .